Fix Printer printing double vision on Windows computer

If you don't know How to Fix Printer printing double vision on Windows computer, get ready and continue reading so that you can learn what you have to know.

Some printers print what appears to be written text on both sides of a page, individual characters printed twice, and so on. In this tutorial, we will give a few fixes to the common problem of your printer printing doubles on Windows 11 and Windows 10.

Possible causes for double vision printing

Following are some of the most common reasons, which can be due to either hardware flaws or incorrect settings in the printer:

One of the most common reasons for duplicate printing is that the print heads become dusty and unclean because of dust or dried ink.

Print heads normally operate within a limited range of temperature and humidity, which itself can alter environmental conditions. The moisture may keep the print damp, encouraging color bleeding, while low humidity results in rapid drying of ink in the printers; this might cause errors.

Wrong Printer Settings: The printer gets instructions from your computer when you install it within it regarding what and how to print. You can very easily get prints with double vision if the settings of paper regarding its size, type, or texture are not matched with the printer's settings of that particular paper on which you are printing.

Lousy drivers: Drivers of a printer are what really convey the printing instructions from a computer to the device. Bugs, outdated software, and incompatibilities that create miscommunication between drivers result in double-vision printing.

During a print, the print carriage depends on encoder strips to keep track of its position. These do tend to get dirty over time. Another function of the Encoder Strip when starting off the print operation is sending a signal to turn on the print heads. If it's dirty and can't determine the print position accurately, there could be double printing.

Fix Printer printing Double Vision on Windows 11/10

If you use a Windows computer, and the printer shows double vision in printing, then attempt the following procedures:

Check the Configuration of the Printer

Use only genuine ink or cartridges.

Realign the printhead

Clean Encoder Strip

Do a Hard Wipe

Reinstall firmware and drivers for the printer.

1] Check Configuration of the Printer

We will also be able to eliminate problems concerning print quality by examining the printer settings. The type and quality of print depend on these settings in a printer. We are able to do prints in both directions because of the bidirectional capability available in the printer. Nonetheless, misaligned or imperfect calibration of print heads can give a print resulting in double vision types.

How to determine if the printer is set up correctly?

Press the Windows key along with R to open the Run dialog box. Type shell:Printersfolder and click OK.

Right-click the icon of the printer and enter into the properties of it.

Under Page Setup, everything related to paper size, font, and print quality should be pre-set.

To turn bidirectional printing off:

Click on Printing Preferences upon right-clicking the Printer icon.

To disable the bidirectional communication in the Printing Preference window, under the tab 'Ports', click the drop-down menu under 'Bi-directional Communication' and then select the option 'OFF'.

2. Use only genuine ink or cartridges.

Using genuine business supplies will help prevent the duplication of prints no matter whether the printer uses ink tanks or cartridges. This can also help us avoid incompatibilities that may cause poor quality prints.

3. Align the print heads of the printer

Sometimes, if the print head is not in an optimized position, there may be printing defects or no printing at all. In this case, we can realign or recalibrate the printer. How to align the printer:

Open the folder of the printer and right-click on the printer to reach its printing properties.

In the Maintenance menu, select the Print Head Alignment option (the interface or options available might be different according to the model and manufacturer).

4. Cleaning the Encoder Strip

If these ways are used for encoder strip cleaning, it will position and move the print carriage right:

Turn off the printer.

Open the printer lid for access to the encoder strip and position it parallel to the print head.

Lightly clean the strip with a wet paper towel or soft cloth, lightly massaging it over.

Now, switch on the printer once the strip is completely dry and covered.

When you are done, print out a document to check whether the problem has gone away or not.

5.] Do a Factory Reset.

A hard reset cleans all user settings and data from the printer's memory. If the problem occurs due to software or communication issues, we can resolve it with the help of a hard reset:

Pull out all the ink cartridges from the printer and then cut the power cord.

Wait for around 30–40 seconds for the printer to become idle, then reconnect the power cord and insert the cartridges.

Turn on the printer and check if the problem happens again.

Step6: Reinstall the Printer's Firmware and Drivers

In reinstalling the drivers, we ensure the printer software is up-to-date and fully functional; thus, corrupted drivers that may cause double printing will also help us avoid or resolve print quality issues.

Bugs can be ironed out, and hardware/software incompatibilities sorted out through firmware updates. Sometimes, incompatibilities result in duplicate printing; the problem, however, can be sorted out by upgrading the firmware of the printer. Once the correct model of the printer is selected, users can download firmware updates directly from the manufacturer's website.

That is all concerning How to Fix Printer printing double vision on Windows computer, hopefully, it has been of greater help to you.