Continue further to learn How to Fix the Samsung Galaxy Tab Reboot Loop?, as today we will let you know what to do.

Should the Samsung Galaxy Tab ever get caught within a continuous reboot loop after some sort of problematic update or even an app malfunction, then it would just keep restarting without fully turning on. Most of the time, this will take place because the software of your tablet fails to load appropriately, with this usually taking place due to an incorrect firmware update or any other form of software-related conflict. More often, it's caused by an interrupted or failed update.

Apart from software errors, hardware difficulties, such as dead batteries, or extreme heat also leads to system file corruption. 

This essay will discuss possible solutions to that issue.

1. Charge the Device to 100% While it is Powered Off




Ensure your tablet has enough juice to boot up properly by charging it to completion while it's off. This lessens the likelihood that critical startup functions may be interrupted by power concerns, which is particularly helpful in cases when battery problems were the root cause of the restart loop. An uninterrupted supply of power, such as a fully charged battery, will allow it to complete the startup process and, in the event that power problems were to blame, may resolve the issue. While the Galaxy Tab is booting up, connect it to a wall socket and attach the charger onto it. 


After about 6 to 10 seconds of pressing and holding the Power key, the gadget will shut down. 


Instead of rebooting itself, the screen will light up with a battery charging icon after it has been shut off. 


The Galaxy Tab should charge up completely to 100%.


To exit the reboot loop, you simply have to turn on the tablet after it is fully charged and then unplug it.

2. Completely Clear the Device Cache


Sometimes, a boot loop is caused by temporary system files, which might have been corrupted and stored in your device's cache. These files are useful for applications, but when too many of these files build up or an error occurs after an update, they become useless. You actually ensure that the device will start up afresh with new undamaged files by deleting the cache sector. This will not affect your personal data in any way.


Power off the cell phone tablet. 


Next, after powering it off, press and hold the Power and Volume Up buttons until you see the Samsung logo. This would mean the tablet has entered into ASR mode.


Using the volume rocker, highlight the option "wipe cache partition"; press the power button to select it.


After wiping the cache, go back to the main menu and select "Reboot System Now". This will reboot the tablet.

3. Reset the Device to Factory Settings


This may be due to corruption of system files, incomplete or unsuccessful upgrades, and incompatibility with newly installed applications. Restore to factory settings would work out such problems by reverting the gadget to its original state and clearing the problematic files or setting. At the close of this process, the gadget would be up and working again, with all its software errors cleaned.


If all else fails, you may want to restore the device to its default settings:


Off the device and boot it into Recovery Mode, as described in method two above.


Highlight the wipe data/factory reset option in Recovery Mode using the Volume rocker; press and hold the Power button to select this option.


Tap Yes - Erase All User Data on the next screen for confirmation.


Wait a while, it would almost complete the factory reset.


Finally, to reboot the device running the Android OS, tap on Reboot System Now.

4. Downgrade Your Android Device


The device should be rolled back into an older version of Android, to the extent that any flaws or compatibility issues introduced by more recent updates would not strike. This method of troubleshooting seamlessly reverses changes that may be causing dysfunction in the device.


Downgrading can be avoided sometimes, but it needs very high level technical knowledge and at times results in data loss. So, it has to be tread with caution. Make sure to back up your data before you proceed to use this patch.


Now that you know How to Fix the Samsung Galaxy Tab Reboot Loop?, we hope we have been as helpful as possible to clear any doubts.




Other Articles
How to damage opponents with Boom Billy in Fortnitemares
I will tell you in this documentary How to damage opponents with Boom Billy in Fortnitemares

How to Fix Nvidia Windows has stopped this device because it has reported problems. (Code 43)
That's all on How to Fix "Your Credentials Did not Work" in Remote Desktop. We really do hope that we have been able to help as much as possible.

How to get all Loungefly items in Disney Dreamlight Valley
I will recommend you How to get all Loungefly items in Disney Dreamlight Valley

How to Fix “Your Credentials Did not Work” in Remote Desktop
Pay close attention so you can learn How to Fix "Your Credentials Did not Work" in Remote Desktop, here you will find everything.

How to Fix ‘There Was A Problem Communicating With Google Servers’
So, to learn How to Fix 'There Was A Problem Communicating With Google Servers', read on because today we are providing you with the steps to do it.

How to Enable and Disable the Windows Key
Get ready because today we are going to let you know how to Enable and Disable the Windows Key.

How to Fix The Remote Computer requires network level authentication
Keep reading to learn How to Fix The Remote Computer requires network level authentication, because here you will find all that you need.

How to Deflect Beams in Dragon Ball Sparking ZERO
I will teach you in this documentary How to deflect lightning in Dragon Ball Sparking ZERO