How to fix 5E error code on Samsung washer

Learn how to resolve the 5E error code on your Samsung washer by checking for kinks or blockages in the inlet hose and cleaning the laundry tub.

Title: How to Fix the 5E Error Code on Your Samsung Washer

If you own a Samsung washer, you may have encountered the frustrating 5E error code at some point. This error code indicates a problem with the draining system, preventing your washer from completing its cycle. While it can be concerning, the good news is that resolving the 5E error code is often a simple task that you can tackle on your own.

In this blog post, we will guide you through three easy steps to fix the 5E error code on your Samsung washer. By following these steps, you can quickly troubleshoot the issue and get your washer back up and running smoothly in no time.

I. Step 1: Check for a Clogged Drain Hose

The first step in resolving the 5E error code is to inspect the drain hose for any blockages or clogs. A clogged drain hose can prevent water from draining properly, triggering the error code. Here's how you can check and clean the drain hose:

1. Unplug your washer: Before you begin, make sure to unplug your washer from the power source to ensure your safety.

2. Access the drain hose: Locate the drain hose at the back of your washer. It is usually connected to the drainage system or laundry tub. Carefully pull the washer away from the wall to gain better access to the hose.

3. Inspect the drain hose: Examine the drain hose for any kinks, bends, or obstructions. It's common for lint, debris, or small objects to get lodged in the hose, causing a blockage. If you notice any blockages, gently remove them using a soft cloth or a long brush.

4. Clean the drain hose: If the drain hose appears dirty or clogged, it's a good idea to clean it thoroughly. Fill a bucket with warm water and a mild detergent. Disconnect the drain hose from the washer and submerge it in the bucket. Use a brush to scrub away any dirt or residue. Rinse the hose with clean water and allow it to dry completely before reattaching it to the washer.

5. Reconnect and test: Once the drain hose is clean and free from blockages, reconnect it to your washer and ensure it is securely in place. Plug your washer back in and run a test cycle to see if the 5E error code has been resolved.

II. Step 2: Inspect the Inlet Hose

Another common cause of the 5E error code is a kinked or blocked inlet hose. The inlet hose is responsible for bringing water into the washer, and any restrictions can result in the error code. Follow these steps to inspect the inlet hose and ensure proper water flow:

1. Unplug your washer: As always, start by disconnecting your washer from the power source to avoid any accidents.

2. Locate the inlet hose: The inlet hose is usually connected to the back of your washer and is responsible for supplying water to the machine. Carefully pull the washer away from the wall to access the hose.

3. Check for kinks or bends: Inspect the inlet hose for any kinks, bends, or restrictions that may be obstructing the water flow. Straighten out any kinks or bends gently to ensure a smooth, uninterrupted water supply.

4. Examine for blockages: Look for any debris, dirt, or mineral deposits that may be blocking the inlet hose. If you notice any blockages, use a soft brush or cloth to remove them. If necessary, you can also detach the hose and rinse it under running water to ensure it is completely clean.

5. Reconnect and test: Once you have inspected and cleaned the inlet hose, reconnect it to your washer, ensuring it is securely attached. Plug your washer back in and run a test cycle to verify if the 5E error code has been resolved.

III. Step 3: Clean the Laundry Tub

In some cases, the 5E error code may occur due to a dirty or clogged laundry tub. Cleaning the tub is an essential step in resolving the error code. Follow these steps to clean your laundry tub effectively:

1. Unplug your washer: Before you start cleaning the tub, unplug your washer from the power source to ensure your safety.

2. Remove any standing water: If there is any water remaining in the tub, remove it using a bucket or a towel. Make sure the tub is completely empty before proceeding.

3. Prepare a cleaning solution: Depending on the level of dirt and grime in your tub, you may need a cleaning solution. Mix warm water with a mild detergent or a tub cleaner, following the manufacturer's instructions. Apply the solution to the tub, spreading it evenly across the surfaces.

4. Scrub the tub: Use a soft brush or sponge to scrub the tub's walls, bottom, and any other accessible areas. Pay extra attention to corners, grooves, and any areas where dirt tends to accumulate. If you encounter stubborn stains or deposits, you can use a non-abrasive cleaner or a paste made of baking soda and water for added cleaning power.

5. Rinse thoroughly: After scrubbing, rinse the tub thoroughly with clean water to remove any residue or cleaning solution. Make sure there are no traces of detergent left behind.

6. Dry and reassemble: Use a towel or cloth to dry the tub completely. Once the tub is dry, reassemble any removable parts, such as lint filters or drain plugs. Plug your washer back in and run a test cycle to confirm if the 5E error code has been resolved.

Dealing with the 5E error code on your Samsung washer can be frustrating, but with the steps outlined in this blog post, you can resolve the issue without the need for professional help. By checking for a clogged drain hose, inspecting the inlet hose, and cleaning the laundry tub, you can eliminate the causes of the error code and get your washer back to its optimal performance.

"

Remember to always prioritize your safety by unplugging your washer before performing any troubleshooting steps. If the error code persists or you encounter any difficulties during the process, it is advisable to consult a professional technician or contact Samsung customer support for further assistance.

"

We hope this guide has helped you understand how to fix the 5E error code on your Samsung washer. If you have any additional tips or questions, please feel free to share them in the comments section below. Happy washing!