How to fix Samsung washer 4E code

Resolve Samsung washer 4E code by addressing drain hose, pump filter, washer level, water supply valves, and fill hose.

How to Fix Samsung Washer 4E Code: A Friendly Guide:

Is your Samsung washer flashing the 4E code? Don't panic! We understand that encountering an error code can be frustrating, especially when it disrupts your laundry routine. But fear not, because in this friendly guide, we will walk you through the steps to fix the 4E code on your Samsung washer.

The 4E code is an indication of a water supply error. It means that your washer is not getting enough water to complete a cycle. This could be due to various reasons, such as a kinked or clogged drain hose, a dirty drain pump filter, an unbalanced washer, closed water supply valves, a clogged inlet screen, or a clogged fill hose. By following the steps outlined in this guide, you will be able to resolve this issue and get your washer back to its optimal performance.

So, grab your tools and let's get started!

I. Check the Drain Hose (Prevent Kinking or Clogging):

The first step in troubleshooting the 4E code is to inspect the drain hose. A kinked or clogged drain hose can prevent proper water drainage, leading to the error code. Here's what you need to do:

1. Turn off the power to your washer. Unplug it from the electrical outlet for safety.

2. Locate the drain hose at the back of your washer. It is usually connected to a drain pipe or a laundry sink.

3. Carefully inspect the drain hose for any kinks or bends. Straighten out any kinks to ensure a smooth flow of water.

4. Next, detach the drain hose from the washer and check for any clogs. You can do this by blowing air through the hose or using a long, flexible brush to remove any debris.

5. Reattach the drain hose securely to the washer and make sure it is not bent or twisted.

By ensuring the drain hose is free from any obstructions and properly connected, you can eliminate one potential cause of the 4E code.

II. Clean the Drain Pump Filter:

A clean drain pump filter is essential for proper water drainage in your Samsung washer. Over time, lint, debris, and other foreign objects can accumulate in the filter, leading to water supply issues and the 4E code. To clean the drain pump filter, follow these steps:

1. Turn off the power to your washer and unplug it from the electrical outlet.

2. Locate the drain pump filter. It is usually located at the bottom front of the washer, behind a small access panel.

3. Place a towel or a shallow container beneath the filter to catch any water that may spill out.

4. Open the access panel and carefully unscrew the filter cap. Be prepared for some water to come out.

5. Remove any lint, debris, or foreign objects from the filter. Thoroughly clean it under running water.

6. Once the filter is clean, reinstall it by screwing the cap back on tightly.

It is recommended to clean the drain pump filter regularly to prevent future issues. A monthly maintenance schedule is a good practice to ensure optimal performance of your washer.

III. Leveling Your Washer:

An unbalanced washer can cause water supply problems, leading to error codes like 4E. To avoid this, it is important to check and adjust the level of your washer. Here's how you can do it:

1. Use a spirit level to check if your washer is level. Place the level on top of the washer and adjust the feet accordingly until the bubble is centered.

2. If you don't have a spirit level, you can also check the level manually. Gently push the washer from side to side to see if it wobbles or rocks. If it does, adjust the feet until the washer is stable.

3. Make sure all four feet of the washer are firmly in contact with the floor.

Properly leveling your washer ensures optimal performance and prevents further errors, including the 4E code.

IV. Check Water Supply Valves:

Closed or partially closed water supply valves can trigger error codes like 4E. It is crucial to inspect both the hot and cold water supply valves to ensure they are fully open. Here's what you need to do:

1. Locate the water supply valves behind your washer. They are usually connected to the hoses.

2. Turn the valves counterclockwise to ensure they are fully open.

3. Check if the water supply hoses are securely connected to the valves and the washer.

If you have a Samsung washer, there might be specific troubleshooting steps related to the water supply valves. Please refer to your user manual or contact Samsung customer support for further assistance.

V. Clean the Inlet Screen:

A clogged inlet screen can restrict water flow, causing issues with water intake during cycles and triggering the 4E code. Here's how you can clean the inlet screen:

1. Turn off the power to your washer and unplug it from the electrical outlet.

2. Locate the inlet screen at the back of the washer, where the water hoses connect.

3. Use pliers to carefully remove the inlet screens from both the hot and cold water hoses.

4. Rinse the screens under running water to remove any debris or sediment.

5. Inspect the screens for any damage. If they are damaged, replace them with new ones.

6. Reinstall the screens securely into the hoses.

Cleaning the inlet screen regularly ensures a smooth water flow and helps prevent the 4E code from appearing.

VI. Check for a Clogged Fill Hose:

A clogged fill hose can also lead to insufficient water supply and trigger the 4E code. To check for a clogged fill hose, follow these steps:

1. Turn off the power to your washer and unplug it from the electrical outlet.

2. Locate the fill hoses at the back of the washer, connecting it to the water supply.

3. Turn off the water supply valves.

4. Unscrew the fill hoses from the washer and inspect them for any clogs or debris.

5. Clean the hoses by running water through them or using a long, flexible brush to remove any obstructions.

6. Reattach the fill hoses securely to the washer and turn on the water supply valves.

By ensuring the fill hoses are free from any clogs, you can ensure a proper water supply to your washer and prevent the 4E code from recurring.

Congratulations! You have successfully troubleshooted and resolved the 4E code issue on your Samsung washer. By following the steps outlined in this guide, you have tackled potential causes such as a kinked or clogged drain hose, a dirty drain pump filter, an unbalanced washer, closed water supply valves, a clogged inlet screen, and a clogged fill hose.

"

Remember, regular maintenance and attention to these areas can help prevent the 4E code from appearing in the future. If you encounter any difficulties or have further questions, do not hesitate to reach out to Samsung customer support or consult your user manual for additional troubleshooting steps.

"

We hope this friendly guide has been helpful in resolving the 4E code on your Samsung washer. Happy washing!