How to unlock the Hotdog outfit in Dress to Impress

Prepare yourself to learn how you can fix Pipeline Overextended in Factorio Space Age, since we are going to cover it here.

The update of Factorio: Space Age changed the ways of handling fluids and pipes, adding many new systems into the factory building model. With the new system, it gets quite usual that overextension of pipelines is very often the root of new pipe problems. A solution to the Pipeline Overextended problem in Factorio Space Age has been found.

Overextended Pipeline: What to Do

Your best bets at fixing the Overextended problem are installing a pump or upgrading your pipes if your Factorio Space Age pipeline is too long or has poor quality pipes. You could build really long pipelines in Factorio 1.0 with no risk of throughput drops, but the fluid system has been overhauled in Factorio Space Age 2.0; thus, you'll need to either make your pipes more compact or use Pumps.

The new system creates a 320×320-tile zone around the source of fluid creation; this may be a pump or any other device that might act like the Offshore Pump or a Pumpjack. Fluids will have no problems in flowing around within this 320×320 tile area. To go beyond this 320×320 tile area, you'd have to set up and run another pump. Or, in other words, this will be expanding the area in which you can pump fluids effectively in your pipeline into a new 320×320 tile area around that Pump. First of all, you need to research Fluid Handling before you can actually build a Pump. It requires fifty red Automation Science Packs and fifty green Logistic Science Packs to research the Fluid Handling. Its two prerequisite studies are Engine and Automation 2. At last, building a pump requires one steel plate, one engine unit, and one pipe.

Remember you must also supply power to the Pump. Needing to run power lines beside a pipeline, powering each pump installed can become super annoying - especially if the pipeline is running along a long distance for convenience's sake. To keep a chain of functioning pumps in your pipeline working, just add another pump every 320 tiles.

Another way of handling Overextended Pipelines

While you could add pumps to your pipeline, it would be a bit of a pain to do so, Wube Software likely intends for Trains to be one of your better alternatives for handling fluids over long distances. Once you've researched Railways and Fluid Handling, this technology unlocks the Fluid Wagon which costs 200 Red Automation Science Packs and 200 Green Logistic Science Packs to study.

Once researched, to craft each Fluid Wagon you will need the following: 16x Steel Plate 1x Hard Gear Wheel with a 10-fold Increase in Strength 1x 1-Tank Storage Unit No. 8 Pipes Once you have built your network of rails and have placed a Fluid Wagon on your train, all that's required is a pump at fluid loading and unloading stations.

Attach the Pumps to the Power Poles, and align them so that they're pointing toward the direction of the Fluid Wagons. Your pumps will fill the Fluid Wagons with fluids at the fill station and extract them at the unload station. You can then store the fluids in Storage Tanks until you need them. 

That's all you need to know about How to fix Pipeline Overextended in Factorio Space Age, we hope we could be of the most help to you.