How to Fix Windows PC won’t boot after installing graphics drivers

To get the most out of them, drivers need to be updated. However, recently many users started to face boot issues after updating the graphics card driver to the latest available version. If your PC will not boot after installing graphics drivers, then you can use the following suggestions from this article.

Windows PC Won't Boot after Installing Graphics Drivers

Fix Windows PC won’t boot after installing graphics drivers

Apply the following fixes if your Windows 11/10 PC will not boot after installing the graphics drivers.

Disconnect all peripherals

Fresh install of the GPU driver

Reset BIOS to default

Perform a Startup Repair

System Restore

All these repairs have been elaborated on below.

1) Turn off all the electronics which are just not crucial for your survival.

Start your computer by unplugging all extra and unnecessary devices. After you've gained access to your computer, open up your Device Manager and look at the status of your graphics driver. If this goes well, then do:.

A warning sign shows that the driver has not been updated successfully.

If your GPU driver is throwing an error, then you can resolve it by simply reading the message which Device Manager is trying to convey.

Read further: Windows PC keeps restarting after installing a GPU.

2] Install the GPU driver with no changes.

You will need to reinstall the GPU driver cleanly. For that, you need to boot into Safe Mode. Since your computer is not going to boot even after installing the graphics driver, you have to use Windows Recovery Environment to get into Safe Mode.

You need to power on your computer to enter Windows Recovery Environment. When the Windows logo or the manufacturer's logo first displays on the monitor, quickly turn off your computer by pressing and holding the power button. When you see the "Preparing Automatic Repair" screen, perform steps 1 through 3 above. Proceed to Advanced > Troubleshoot > Advanced options > Startup settings and hit Restart. Hit the F5 key and enter Safe Mode once it reboots

Another option to access Windows Recovery Environment is by using the installation media of Windows. However in order for you to make Windows Installation Media on a USB Flash Drive, you need access to another functional machine.

You can only download and install DDU software management once you get your computer booted into Safe Mode with Networking. Your WiFi might not connect, even on Safe Mode. In that case, use the Ethernet wire to hook up your computer. If an ethernet cable is not available, DDU may be copied through the use of a USB flash drive from another working machine. Insert the USB flash drive and launch the DDU setup. Once it has installed, launch the Display Driver Uninstaller and uninstall your GPU driver completely.

3] BIOS Flash

Set everything to its default in the BIOS. For most computers, access to the BIOS is effected using different keys depending on the brand of one's computer. Reset the device by going into BIOS using its assigned key. If that doesn't resolve anything, clear the CMOS. Opening the computer case for the very first step, find the CMOS battery. Take out the battery from its charging port and let it sit for a few minutes. Now power on your computer and insert the battery from underneath, correctly aligning the plus side up.

Whether it solves the problem, head to the manufacturer's website for your machine to see whether there is any new BIOS update. Under that case, go ahead and install it. The machine Information utility allows you to verify the version of BIOS installed on your machine. Go to the main page and look for the BIOS firmware.

4] Perform a Startup Repair

Fix your computer using the Startup Repair tool. You can use this utility via the Windows Recovery Environment. If you are unable to boot into the Windows Recovery Environment, you can do so using Windows Installation Media. After you are in the WinRE, hit Troubleshoot >> Advanced options >> Startup Repair.

Start your computer again, and this time, ensure it boots properly.

System Restore means going back to an earlier version of Windows and deleting all of your installed software and drivers. So, if the problem is still there, you can roll back your graphics driver version with the use of the System Restore program.

You will have to boot into Windows Recovery Environment and bring your computer up and running just like it was. To access the System Restore option inside WinRE, select Troubleshoot, then Advanced options. Now, find the backup you've made before all of this happened, and select it.

These steps for sure must work out and get your PC up normally again.