I would tell you in this documentary How to solve the error “An overcurrent condition was detected on the USB device”
In most cases, the system will shut down shortly after displaying an alert message to protect the hardware when the error "Excessive current detected on USB device" appears. This warning suggests that one or more USB ports are drawing too much power, either from a short circuit or a faulty device. The most common cause is a damaged USB port or cable, particularly on front panel USB ports, or a malfunctioning USB hub.How to solve the error “An overcurrent condition was detected on the USB device”
In most cases, the system will shut down shortly after displaying an alert message to protect the hardware when the error "Excessive current detected on USB device" appears. This warning suggests that one or more USB ports are drawing too much power, either from a short circuit or a faulty device. The most common cause is a damaged USB port or cable, particularly on front panel USB ports, or a malfunctioning USB hub.
Motherboard issues, such as a faulty power strip or internal cable tab, are other possible causes. In this article, we will discuss different solutions to address this problem.
To begin troubleshooting, it is essential to check the connected USB devices, as the error could be caused by a faulty device or cable. Whether a specific device is drawing excessive power or has a short circuit can be determined by disconnecting all devices. By reconnecting devices one by one, the problem can be easily located, preventing unnecessary replacements or further damage to the hardware.
- Make sure all USB devices on your computer are disconnected. After disconnecting the devices, reconnect one and turn on your computer again. Once all the USB devices have been removed, repeat this step.
- You should probably find the faulty device that is causing the error message.
1. Reset the CMOS battery.
Resetting the CMOS can fix configuration issues or faulty voltage settings that are causing this error by resetting the BIOS settings to the original defaults. It removes any incorrect power settings that may be causing problems on the USB port, allowing the system to start again with the default settings.
- Disconnect all cables and remove the computer.
- Place the CMOS battery on the bottom panel after opening the computer chassis.
- Remove the CMOS battery for a few minutes and then put it back.
- To check if the fault has been resolved, turn on and restart your computer.
2. Make sure the front USB ports are properly connected.
A short circuit or a bad connection with the motherboard can be the reasons for an error caused by the front USB ports. To fix the problem, check that these connections are secure and undamaged.
- Completely unplug your computer and unplug the power cord. Undo the fasteners by opening the bottom of your computer case.
- Look for the USB connectors on the bottom panel – these are usually for the front panel USB ports, as the rear panel ports are connected directly to the bottom panel and are, in most cases, unrepairable.
- Once you have found the correct pins and connector, unplug them.
- To check if the error message persists, turn off your computer. If that is not the case, then the USB connector was the problem. You can replace the connector or have it checked by a professional.
3. For advanced users, update your BIOS.
Finding compatibility issues or power problems with USB ports can be resolved by updating the software that controls your hardware, which is the BIOS. Manufacturers frequently release BIOS updates to fix these problems – this is a good way to fix the problem. Therefore, an update could help the motherboard manage power to USB devices more effectively, especially if the error is caused by outdated software settings.
You can learn how to update the BIOS on various machines by following our guides on how to update the BIOS for an HP desktop/laptop, a Gateway desktop/laptop, a Lenovo machine, an MSI motherboard, and a Dell desktop/laptop.
4. Check for jumpers
Occasionally, errors like "Overcurrent condition detected on USB device" happen when there are no jumpers on the motherboard. Missing or misplaced jumpers, which help control electrical circuits, can cause the error by sending incorrect signals. To ensure that the motherboard is working properly and to fix errors caused by incorrect connections, check that all necessary jumpers are in place and set correctly.
Make sure that each jumper is present and undamaged by inspecting the connections on the motherboard. It's easy to replace if you need to.
Step 5: Replace the motherboard.
Replacing the motherboard might be one of the best ways to fix this error if none of the above methods work. In most cases, this is due to some fault in the internal hardware of the computer.There are faulty USB controllers or damaged circuits. The mother board will keep reading the power levels incorrectly if the polymer capacitors controlling the USB power have been damaged.
It is suggested that you contact the support team of the motherboard manufacturer you are using. They can provide specific guidance for your motherboard model and be aware of any known or removed product issues related to your situation.
The motherboard may be replaced or temporarily installed to ensure that all components in your system are working properly.
Today we teach you how to write an ISO image file to a USB memory with Etcher in a simple way.
I will teach you How to fix the problem of USB ports staying on after shutting down the computer
Get ready to learn How to Fix a PS4 Turning Off By Itself, as today we are going to tell you how it's done.
Following is how one can fix the 'com.apple.mobilephone error 1035' on an iPhone for the less-informed.
I will recommend you How to fix error code 0x8007025D when installing Windows
Read on to see how you can restore missing power plan options in Windows. All is covered for you here.
Get comfortable, and let me show you how to get the Microphone Boost option in Windows; here is everything you need.
I will explain to you today How to solve the problem of the laptop turning off when disconnected
If you are here it is because you want to know How to Fix the 'Unable to Connect to World' Error in Minecraft?, which we will go over in detail for you.
Now get cozy so you can learn What is Lavasoft Web Companion and Should it be Removed?, because today we will tell you all you need to know.