Learn How to Fix USB drive showing up as 2 Drives appearing as two separate drives with our comprehensive guide on troubleshooting USB drive problems.
USB drives are a convenient and popular way to store and transfer data. They are small, portable, and can hold a large amount of information. However, sometimes when you plug in your USB drive, you may notice that it is being shown as two separate drives on your Windows PC. This can be frustrating and confusing, but there are a few simple methods you can try to fix this issue.
Here are some ways to fix a USB drive showing up as two drives on your Windows PC:
How to Fix USB drive showing up as 2 Drives
1. Use some basic troubleshooting tips
The first thing you should do is try some basic troubleshooting steps to see if the issue can be easily resolved. Start by unplugging the USB drive and plugging it back in. Make sure it is plugged in securely and try using a different USB port on your computer. If the issue persists, try plugging the USB drive into a different computer to see if it shows up as one or two drives. If it shows up correctly on another computer, then the issue may be with your PC and not the USB drive.
2. Run the Hardware and Device Troubleshooter
About How to Fix USB drive showing up as 2 Drives, Windows has a built-in troubleshooter that can help identify and fix common hardware issues. To run the Hardware and Device troubleshooter, go to the Control Panel and click on 'Troubleshooting'. Then, under the 'Hardware and Sound' section, click on 'Configure a device'. Follow the prompts to let the troubleshooter scan for any issues and fix them if possible.
3. Clean and repartition USB using Command Prompt
If the above methods do not work, you can try using the Command Prompt to clean and repartition the USB drive. This will erase all the data on the drive, so make sure you have a backup of your files before proceeding. To do this, open the Command Prompt as an administrator and type in the following commands:
- Type 'diskpart' and press Enter.
- Type 'list disk' and press Enter to see a list of all the disks connected to your computer.
- Identify your USB drive by its size and type 'select disk X' (replace X with the number of your USB drive).
- Type 'clean' and press Enter to erase all the data on the drive.
- Type 'create partition primary' and press Enter to create a new primary partition on the drive.
- Type 'format fs=ntfs quick' and press Enter to format the drive using the NTFS file system.
- Type 'assign letter X' (replace X with the letter you want to assign to the drive) and press Enter to assign a drive letter to the USB drive.
- Finally, type 'exit' and press Enter to close the Command Prompt.
4. Use a third-party tool to clean and repartition USB
If you are not comfortable using the Command Prompt, you can use a third-party tool like EaseUS Partition Master to clean and repartition your USB drive. This tool has a user-friendly interface and can help you fix the issue in a few simple steps. After downloading and installing the software, follow these steps:
- Launch EaseUS Partition Master and right-click on your USB drive.
- Select 'Delete partition' to erase all the data on the drive.
- Right-click on the unallocated space and select 'Create partition'.
- Set the partition size and choose 'NTFS' as the file system.
- Click on 'Apply' to save the changes.
In conclusion about How to Fix USB drive showing up as 2 Drives, A USB drive showing up as two drives on your Windows PC can be a frustrating issue, but with these methods, you should be able to fix it. If none of the above methods work, it is possible that the issue is with the USB drive itself and it may need to be replaced. Remember to always safely eject your USB drive before unplugging it from your computer to avoid any data loss.
Other Articles