CarParts.com Commercial How to replace the Power Steering Pulley 2003-2007 2025

VIDEO CarParts.com How to replace the Power Steering Pulley 2003-2007 TV commercial 2024 • How to replace the Power Steering Pulley 2003-2007 Honda Accord 🛞 Find the parts used in the video on CarParts.com just there https://carparts.solutions/ACCORD Over 1 million auto parts at your fingertips, download our app 🤖 https://carparts.solutions/AppGooglePlay or 🍎 https://carparts.solutions/AppIOS ⚙️ NEEDED CARPARTS AND PRODUCTS - Power Steering Pulley : https://carparts.solutions/PowerSteer... 💪 TIGHTENING TORQUES - Power steering pulley holding nut : 47 Ft-lbs 🛠 TOOLS The toolbox recommended by CARPARTS.COM to repair your Honda Accord : - https://carparts.solutions/ToolBox List of the tools we used to replace the front oil pressure switch on a Honda Accord : - 14mm offset wrench - Socket - Extender - Pulley lock wrench - Breaker bar - 19 mm socket - Ratchet - Torque wrench : 20 to 250 Ft-lbs https://carparts.solutions/TorqueWren... 100 to 600 Ft-lbs https://carparts.solutions/TorqueWren... Don't forget to subscribe : https://www.youtube.com/@CarPartscomO... 🛻 COMPATIBLE VEHICLES The operation and tools displayed in the video should be available on the following vehicles : - 2003 Honda Accord - 2004 Honda Accord - 2005 Honda Accord - 2006 Honda Accord - 2007 Honda Accord 📽 🛠 USEFUL VIDEOS 🛠 📽 How to replace the Battery 2003-2007 Honda Accord : ⚠️ CARPARTS.COM'S INFOS - We recommend taking a picture or to draw the path of the belt around the different pulleys, in order to position it correctly later. - You can enlarge the lever by inserting a socket into an extender and putting it on the end of the offset wrench, which will help you loosen the belt. 🚨 DISCLAIMER This video is for entertainment purposes only. Carparts.com, Inc. disclaims all damages including, but not limited to, actual, consequential, and/or punitive, for any liability, claim, or any other injury or cause related to or arising from any information or lack thereof posted in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All mechanical car projects entail some risk. It is the sole responsibility of the viewer to assume this risk. If you are in doubt, please consult a licensed mechanic in your area. 📚 CHAPTERS 0:00 Intro 0:30 Disconnect the battery 0:40 Remove the serpentine belt 1:09 Remove the power steering pulley 1:32 Install the new power steering pulley 2:19 Install the serpentine belt 2:42 Reconnect the battery Intro 0:04 You can order the power steering pulley used in 0:06 the video on Carparts.com via the link in the description. 0:12 Turn your engine off, set the parking brake pull on the hood release handle, and open the hood. Disconnect the battery 0:30 For safety reasons, we advise you to disconnect the battery. 0:34 To do so, we recommend watching the video : ‘How to replace the Honda Accord car battery’. 0:39To change the power steering pulley, you need to remove the serpentine belt. Remove the serpentine belt 0:43We recommend taking a picture or to draw the path of the belt around the different pulleys, 0:47 in order to position it correctly later. Using a 14 mm offset wrench, loosen the belt by 0:53 turning the serpentine belt tensioner clockwise. Here’s a tip! You can enlarge the lever by 0:58 inserting a socket into an extender and putting it on the end of the offset wrench, 1:03 which will help you loosen the belt. Meanwhile, remove the serpentine 1:07 belt from the power steering pulley. Take a pulley lock wrench, which allows Remove the power steering pulley 1:11 you to counter-lock the pulley rotation, while you loosen the power steering pulley retaining nut, 1:16 using a breaker bar and a 19 mm socket. Finish unscrewing by hand. 1:28 You can now remove the power steering pulley. You can order the power steering pulley Install the new power steering pulley 1:33 used in the video on Carparts.com via the link in the description. 1:37 Take the new pulley and put it in place. Make sure it is pushed in as far as it will go. 2:03 Then screw the nut back on by hand. Tighten the nut using a ratchet 2:07 and a 19 mm socket, counter-locking pulley rotation with the lock wrench. 2:12 Finish tightening using a torque wrench. Turn the serpentine belt tensioner clockwise using Install the serpentine belt 2:22 the 14 mm offset wrench and the extender, and put the belt back on the power steering pulley. 2:34 Then release the belt tensioner to fully extend the belt. 2:37 Before starting your car again, check that the belt is properly positioned in all the pulleys. 2:41 Reconnect the battery. Operation complete. - advertisement spot 2024