Si vous ne savez pas comment résoudre le problème « Connexion expirée : aucune information supplémentaire » dans Minecraft, alors soyez rassuré car nous sommes là pour vous aider.

Il s'agit du problème de « connexion expirée : aucune information supplémentaire » qui empêche tout joueur d'entrer dans un serveur multijoueur dans Minecraft. Le jeu revient en arrière après avoir essayé de se connecter pendant ce qui semble être une éternité. La plupart du temps, ce message indique qu'à ce stade, il y a un problème avec la façon dont votre ordinateur se connecte au serveur, et qu'il pourrait donc s'agir d'un problème de réseau.

Délai de connexion expiré: serveur Minecraft

La cause la plus fréquente de l'impossibilité de connexion de Minecraft est due à des paramètres incorrects ou bloqués dans le routeur ou le pare-feu. D'autres causes probables sont des incompatibilités de version avec Java, une incompatibilité côté serveur ou une configuration d'adresse IP ou de nom incorrecte. Cet article explique comment corriger cette erreur.

1. Essayez une autre application antivirus






Parfois, les applications antivirus décident de faire la loi et de bloquer des applications classiques, dont Minecraft. Vous pouvez essayer de remplacer l'application par une autre ou d'ajuster les paramètres en conséquence pour empêcher l'antivirus d'interférer avec l'échange de trafic réseau entre le jeu et votre serveur. Ainsi, le PC du joueur pourra interagir correctement avec le serveur.




Tapez «control» et appuyez sur Entrée après avoir appuyé simultanément sur les touches Win + R. Le Panneau de configuration devrait maintenant être ouvert.




Dans la section Programmes du Panneau de configuration, cliquez sur le bouton Désinstaller un programme. Lancez la suppression d'une application via le Panneau de configuration




Cliquez sur le bouton Applications dans l'application Paramètres pour faire apparaître une liste de tous les programmes installés sur votre ordinateur.




Ouvrez le Panneau de configuration ou les Paramètres et recherchez le programme antivirus actuellement installé sur votre ordinateur. Cliquez sur le bouton Désinstaller.




Ouvrez l'assistant de désinstallation et suivez les instructions à l'écran qui vous guideront tout au long du processus de désinstallation. Comment supprimer Avast




Cliquez sur Terminer une fois le programme de désinstallation terminé. Ensuite, redémarrez votre ordinateur pour voir si les erreurs se sont résolues. Vous devrez rechercher une solution antivirus améliorée. Vérifiez si d'autres joueurs reçoivent également le message Minecraft La connexion au serveur a expiré lors de la tentative d'accès à votre serveur !



2. Transférez le port 25565 dans votre pare-feu




Open port 25565 in your firewall to ensure that your machine can reach the Minecraft server without any issues. This is to be done so that Minecraft server data may reach your computer by allowing Minecraft's network traffic to bypass any firewall blocks.




Access Windows Firewall under System and Security from the Control Panel.Windows Firewall Launch




The Advanced settings menu, accessible by clicking the option from the left side of the screen, contains the Inbound Rules.




Right-click on Inbound Rules and select New Rule. Under Rule type, select "Port". To work with specific local ports, under the second radio button select "Specific local ports" and under the first set of radio buttons select either TCP or UDP. In your case, for fixing your Minecraft server, you need to specify port number 25565 for both TCP and UDP.




Click Next after you've selected an option in the next window to Allow the connection. Forwarding Ports in Windows Defender Firewall (25565)




To turn on this rule, select the network type. Remember to fill all the boxes below before clicking on Next if you jump between connecting to different networks.




Click the Finish button after giving the rule a descriptive name. You'd follow Outbound Rules all the way to Step 2, then click Outbound Rules. Make sure no one else is receiving the "Server connection timed out" message when they attempt to connect to your Minecraft server.



3. Port Forward with Your Router




Minecraft employs a port number to connect to the servers, and that is usually 25565. Therefore, for Minecraft, port forwarding is significant. You will be telling your router which port you are forwarding to so that every Minecraft query goes straight to your PC.




Look for "cmd" or "Command Prompt" in the search bar of the Start menu to open Command Prompt. Opening Command Prompt and running the command program as an administrator




Once you have scrolled down to the network adapter corresponding with your connection, write the following command. Note: DNS, Default Gateway, Subnet Mask and MAC: run ipconfig /allRunning the 'ipconfig' command




Press Windows + R to open the Run dialog box, type or paste 'ncpa.cpl' in the bar after hitting OK to open the Control Panel for Internet Connection. How to connect to the Internet through the Control Panel




Right-click the context menu of the active network adapter currently in use and select "Properties." Find in the list the item representing Internet Protocol Version 4 (TCP/IPv4), click to highlight it, then click the "Properties" menu. Properties of IPv4




From the radio option on the General tab, select "Use the following DNS server addresses," then fill in 8.8.8.8 and 8.8.4.4, respectively. Under "Use the following IP address," fill in the same number that you wrote down for Default Gateway, replacing a different last digit. Fill in the remainder of the fields as appropriate. Activating the Domain Name System (DNS) for Google




Now you will need to go to your router's settings and forward a couple of ports.




Open any web browser. In the address bar, type in the number for your Default Gateway number-i.e., its IP address. Press Enter. Go ahead and type your username and password in. This information should be readily available on the internet. The Router: How to Access




Look for the option that says Enable Manual Assignment and click the Yes radio button. Fill the window you opened to type in the MAC address and IP address of your choice with the information you got from the above steps about your machine. Enable Hands-on Assignment




Finally, open settings on your router and click the Add button. You can then type the IP address of your computer.




Continue logging into the interface of your router until you get to the section that would read something like 'Port Forwarding'. What follows next is also generalized and may not work on all routers.




You can either use a single port for the settings of both internal and exterior traffic or you can type in a range of ports to open under Start and End. More precisely, for a Minecraft server, only port 25565 has to be forwarded. You'll have to add it for TCP and UDP.




If requested, click on Enable and then provide the static IP address you set up, according to the steps above, of your computer. Forwarding the ports of your router




Once you have changed what needed to be changed, you simply need to click the "Save" or "Apply" button and then restart your computer with your router. It will reflect whether the timeout problems are gone once there are more users who join your server.



4. Try Using a Different Version of Minecraft




Some servers work only on a particular version of Minecraft, so if that is the case and you are not getting connected, try running an older version. By going to another version that might be compatible with the configuration of the server or one that is known to work properly, this kind of issue can always be avoided and re-established.




To initiate the installation process, open Minecraft and enter the Launcher. Click "Installations".




Select "New" and go to the dropdown "Version". Clicking "New"




Look for a different version of the game from the one you are playing and click on the "Create" button.




By clicking that button, it will automatically download the version provided and it will pop up in the menu Installations.




Try connecting to the server of your choice using this version.




See if this resolves the problem.



5. Check Server Status




To check whether the problem is at the server end-a reason could be maintenance or downtime-check out the server status. Obviously, you cannot fix your network or game settings when the server itself is unavailable.




To access the server check webpage, click here.




Now, enter the IP address of your server and click "Get Server Status". Click the "Get Server Status" .




Make sure your server is up and running.



6. Reset Network Configurations




An out-of-date DNS cache, wrong IP settings, or blocks via the firewall are likely causes to look into. If Minecraft cannot connect to servers, then you should reset your network settings to default for resolving any core issues.




Press the "Windows" + "R" keys on your keyboard to open Run. In the run dialogue box, type in "cmd" to give administrative privileges: press "Shift" + "Ctrl" + "Enter.". Run Terminal




Press "Enter" after each of the following commands to send them all through. runs the command ipconfig release and the flushdns command. The command "ipconfig/renew" inputstr ip reset Set DNS using the netsh command Resetting winsock using netsh




Try restarting your computer because it may clear up the problem.



7. Allowing Through Firewall




Multiplayer servers need to allow Minecraft through their firewall, which allows all the connections. Firewall allows java, so the game will send commands smoothly with live servers.




Press "Windows" + "R" on the keyboard to open Run.




Type "Control" and press "Enter" to enter the control panel. Opening Classic Control Panel




Click on "Windows Defender Firewall" under "System and Security."




Click on "Allow an app through Windows Firewall" on the left side of the window that opens, then click on "Change settings." In the Windows Defender Firewall, click "Allow an app or feature through Windows Defender Firewall."




Look for Java Platform SE Binary and click both public and private options.




Click "Apply" once the changes have been affected if the problem is still there.



8. Try a VPN




Cela peut être dû au fait que votre fournisseur d'accès Internet bloque des sites spécifiques ou des adresses IP particulières. Cela devrait généralement être résolu en utilisant une connexion de réseau privé virtuel (VPN) vers le serveur. Avant d'accéder au jeu, connectez la connexion VPN. Obtenez le meilleur VPN de jeu en testant quelques VPN.








Tout ce que vous devez savoir pour résoudre le problème « Connexion expirée : aucune information supplémentaire » dans Minecraft. Nous espérons vous avoir été aussi utiles que possible.






Other Articles
Comment utiliser les commandes dans Minecraft
Libérez tout le potentiel de Minecraft avec notre guide d'utilisation des commandes !

Comment utiliser l'écran de débogage Minecraft
Maîtrisez l'écran de débogage Minecraft pour améliorer votre gameplay ! Découvrez des conseils et des astuces

Comment résoudre: io.netty.channel.abstractchannel$annotatedconnectexception
Continuez à lire pour découvrir comment résoudre: io.netty.channel.abstractchannel$annotatedconnectexception, car vous êtes au bon endroit pour tout ce dont vous avez besoin.

Comment empêcher la batterie de se vider sur Samsung Gear Smart Watches
Continuez à lire et vous découvrirez comment empêcher la batterie de se vider sur les montres intelligentes Samsung Gear, car aujourd'hui nous vous ferons savoir ce dont vous avez besoin.

Comment rendre la barre des tâches translucide ou entièrement transparente dans Windows
Maintenant, asseyez-vous confortablement pour apprendre à rendrela barre des tâches translucide ou entièrement transparente dans Windowscar aujourd'hui nous allons tout vous dire à ce sujet.

Comment supprimer quelqu'un de Snapchat
Continuez à lire et vous pourrez apprendre comment supprimerquelqu'un de Snapchat car aujourd'hui nous vous dirons ce dont vous avezbesoin.

Comment corriger l'erreur « État de surintensité détecté sur le périphérique USB »
Je vous dirais dans ce documentaire comment résoudre l'erreur «Une condition de surintensité a été détectée sur l'appareil USB »

Comment réparer un PS4 (PlayStation 4) qui s'éteint tout seul
Préparez-vous à apprendre comment réparer un PS4 qui s'éteinttout seul, car aujourd'hui nous allons vous expliquer comment procéder.

Comment corriger l'erreur « com.apple.mobilephone error 1035 » sur iPhone
Voici comment corriger l'erreur « com.apple.mobilephone error 1035 » sur un iPhone pour les moins informés.

Comment corriger le code d'erreur 0x8007025D lors de l'installation de Windows
Je vous recommande comment corriger le code d'erreur 0x8007025D lors de l'installation de Windows

Comment restaurer les options de plan d'alimentation manquantes sur Windows
Lisez la suite pour découvrir comment restaurer les options deplan d'alimentation manquantes dans Windows. Tout est couvert pour vousici.