Discover effective solutions to fix the PS4 "Cannot Start" error (CE-34335-8) and get your console back up and running.
Encountering the CE-34335-8 error code on your PS4 can be frustrating, but fear not! We're here to help you resolve this issue and get back to enjoying your gaming experience. In this guide, we'll walk you through the steps to fix the problem in a friendly and straightforward manner.
Reinstall the hard drive
Step 1: Turn off the PS4 and unplug the power cord.
To begin resolving the CE-34335-8 error code, the first step is to turn off your PS4 and unplug the power cord. This will ensure that you can safely handle the system and prevent any electrical accidents.
Step 2: Carefully reinstall the hard drive.
Once the PS4 is powered off and the power cord is unplugged, you can proceed to reinstall the hard drive. Start by removing the glossy panel on the left side of the console. This will reveal the hard drive enclosure. Carefully slide out the hard drive from its slot and then reinsert it firmly back into place. Make sure it is securely seated before moving on to the next step.
Replace the hard drive with updated system software
Step 1: Download the latest PS4 system software from a trusted source.
If reinstalling the hard drive did not fix the CE-34335-8 error code, the next step is to replace the hard drive with updated system software. To do this, you'll need to download the latest PS4 system software from a trusted source. Visit the official PlayStation website or use a reliable source to ensure you have the correct and safe software version.
Step 2: Replace the existing hard drive with the new one.
Once the system software is downloaded, you'll need to replace the existing hard drive with the new one. Refer to your PS4's user manual or search online for specific instructions on how to safely remove and replace the hard drive. Make sure to handle the hard drive with care and follow the recommended procedures to avoid any damage.
Step 3: Enter PS4 Safe Mode by holding down specific buttons during startup.
After replacing the hard drive, you'll need to enter PS4 Safe Mode. To do this, turn off the PS4 completely. Once it is off, press and hold the power button for about 7 seconds. You will hear a beep and the system will enter Safe Mode. Connect your DualShock 4 controller to the PS4 using a USB cable.
Step 4: Connect a USB drive containing the system software.
In Safe Mode, connect a USB drive containing the downloaded system software to one of the available USB ports on your PS4. Make sure the USB drive is formatted to FAT32 or exFAT and that it contains the correct system software file.
Step 5: Follow on-screen instructions to install the system software.
Once the USB drive is connected, follow the on-screen instructions to install the system software. The PS4 will scan the USB drive and begin the installation process. It may take some time, so be patient and do not turn off the PS4 or disconnect the power during this process. Once the installation is complete, move on to the final steps.
Finalizing the process
Step 1: Wait patiently for the system software installation to complete.
After the system software installation is complete, you will need to wait patiently for the process to finish. This may take some time, depending on the size of the system software and the speed of your USB drive. Avoid interrupting the process by turning off the PS4 or disconnecting the power.
Step 2: Once installed, restart your PS4 and check if the error is resolved.
Once the system software installation is complete, restart your PS4. After the restart, check if the CE-34335-8 error code is resolved. If the error persists, it may be necessary to seek further assistance from Sony's technical support or consider professional repair services.
By following these friendly step-by-step instructions, you should be able to fix the CE-34335-8 error code on your PS4 successfully. Remember to take your time, be patient, and enjoy a smooth gaming experience once again!
Please note that if these steps do not resolve your issue, it may be necessary to seek further assistance from Sony's technical support or consider professional repair services. They will be able to provide more advanced troubleshooting and support to help you resolve the issue.
I will tell you How to fix the error Cannot start the application (CE-30005-8) on PS4
Today in our publication we show you step by step How to download free themes for PS4.
If you don't know how to find free PS VR1 games on PS4, here is a guide that will help you.
Learn how to transfer FIFA points to EA Sports FC 24 and convert them into FC points. Follow our step-by-step guide to make an irreversible decision and enjoy your Ultimate Team!
Discover the ultimate guide to mastering Full Edit Mode in The Sims 4 and unleash your creativity like never before.
Discover the ultimate guide to exporting water in Cities Skylines 2 on our website.
Discover effective solutions to resolve Cities Skylines 2 launcher settings error and enjoy uninterrupted gameplay on our website.
Learn how to resolve the "Hardware Not Supported for Volumetric Materials" issue in Cities Skylines 2 with simple troubleshooting steps and optimizations.
Discover effective solutions to resolve the issue of being unable to invite or add friends to your finals on our website.
Discover effective solutions to resolve character selection issues during the finals with our comprehensive guide.
Discover effective solutions to eliminate screen flickering or tearing in Spider Man 2 and enhance your gaming experience.