How to Fix Other Person Sounds Like Robot During Calls on iPhone - Complete guide

Experiencing a robot voice issue during calls on your iPhone can be frustrating. It can make it difficult to understand the person on the other end of the line and can hinder effective communication. Luckily, there are several steps you can take to resolve this problem and improve your call quality. In this guide, we will walk you through the troubleshooting process in a friendly tone of voice. Let's get started!

Restart the call:

Sometimes, starting the call again can create a different route and potentially fix the signal. If you notice the robot voice issue during a call, hang up and try calling the person again. This simple step might resolve the problem instantly.

Restart your iPhone:

By restarting your iPhone, you can reload system resources and clear any unused data that may be causing the robotic voice issue. To restart an iPhone X or newer model, follow these steps:

• Press and hold down the Volume Down button and Side button simultaneously.
• Keep holding until the ‘Slide to Power Off’ prompt appears.
• Slide to power off your device, then turn it back on after a few seconds.

Check your carrier's reception:

Poor cellular reception can contribute to voice distortion issues. Before making another call, ensure that you have a strong signal by checking with your carrier. If there are any known issues with your carrier's network, they should be able to provide you with information and assistance.

Try a different network or SIM card:

If possible, try making a call using a different network or SIM card to see if the robotic voice issue still occurs. This will help determine whether the problem is related to your specific network provider. If the issue persists on multiple networks, it is more likely a problem with your iPhone.

Disable Wi-Fi calling:

Wi-Fi calling allows calls to be made or received using a Wi-Fi connection in areas without cellular coverage. However, it may sometimes cause audio problems during calls. To disable Wi-Fi calling on your iPhone, follow these steps:

• Go to Settings on your iPhone.
• Tap on Phone > Wi-Fi Calling.
• Toggle off the Wi-Fi Calling option.

Update your iPhone:

Keeping your iPhone up-to-date with the latest software updates can help patch potential bugs and errors that could be causing the robotic voice issue. To update your iPhone, follow these steps:

• Go to Settings on your iPhone.
• Tap on General > Software Update.
• If an update is available, tap on Download and Install.

Avoid using loudspeakers, Bluetooth, or CarPlay:

The robotic voice issue may only occur when you are connected to wireless earphones, loudspeakers, or Apple CarPlay. Try using your iPhone without these accessories to see if the problem persists. If the issue is resolved, it could be related to the specific accessory you were using. In that case, check if there are any firmware updates available for the accessory.

Contact your carrier:

If the issue only occurs when using a specific carrier, it's advisable to reach out to them for further assistance. They may have specific troubleshooting steps or recommendations tailored to their network. They can also check if there are any network issues in your area that might be causing the problem.

By following these friendly guidelines, you should be able to troubleshoot and resolve the robotic voice issue during calls on your iPhone. Remember to try each step one at a time and check if the problem is resolved before moving on to the next step. It's always a good idea to keep your iPhone updated with the latest software updates and to avoid using accessories that may interfere with the call quality. If the issue persists, don't hesitate to seek support from your carrier or Apple customer service. They have the expertise to assist you further and provide customized solutions. Happy calling!