How to Fix No Internet after resetting the router

Although this often resolves most issues, sometimes a router reset creates new ones. In this case, after the restart of the router, we have a wireless connection established but no connected device gets the Internet. Assuming that rebooting the router did not restore the Internet connectivity, here in this article, we are going to review the possible solutions.

What gives when my router's on, but the Internet is down?

This may be due to several reasons that the router shows connectivity, yet the Internet is not available. Typically, when such an instance occurs, this means that the router was not able to reconnect to the Internet service provider. Whatever the reason may be for this, whether the cable is broken or setting configuration went wrong, in case the router is unable to attain this, it will show connectivity and yet no Internet. Other possible causes include older hardware on the network devices or firmware issues of the router.

Solution: Router reset does not restore internet access

In case you have restarted or reset your router, and still cannot access the internet, you do the following on your Windows computer:

Check the connections physically.

Disable your network adapter.

Change the settings of your router.

Update the firmware of the router

Disable Wireless on Computer

Kill all protocols over the network

Route through Google's Public DNS

Here is a troubleshooting guide to get you started.

1. Physical links

Since it is typically the easiest but most overlooked problem, it is critical first and foremost to check for physical connections. Since disconnected or loose cables are a given, make sure each cable is firmly connected to its corresponding port in the router and modem. First, ensure the network cable is hooked up to the modem's WAN or Internet port. Next, using an Ethernet cable, hook up the modem's Ethernet port to the router's WAN or wide area network port. Check to ensure the Internet service provider's or ISP cable is also properly connected to the wide area network or WAN port of your router.

2. Restart your networking device.

The next step you could try after trying to reset the router involves power cycling. To power cycle the router, you must remove all cords for one minute, then reconnect them. This will allow your router to reload your settings that you altered and, hopefully, start working again.

3. adjustment of settings within the router

Sometimes, the reconfiguration of the router helps resolve issues pertaining to the linking of the router to the Internet Service Provider. In this case, all the settings on the router will be wiped off, so we'll have to reset the settings later on. Reset and then Reconfigure the router.

Open a web browser and type in the IP Address, usually printed on a label on the rear end of the router, of the router to get into its settings.

You get into the router with default credentials or something as generic as admin; password-admin or 1234/0000.

Change Wireless Network Settings: Change the settings that popup on-screen to make a choice for the type of connection.

Finally, reboot the device and the router to see if the speed of the Internet normalizes.

How to Get the Default Login Credentials and URL of Any Router.

4. the router's firmware has been updated

The router of yours hasn't gotten a firmware update in quite a while. Otherwise, try reaching out to their technical support for the router or checking whether there is a firmware upgrade that you can get through the official software. Follow these steps as described if you would like to know how to do it.

Open your internet browser and access the router manufacturer's website.

In the Menu section, click Support, then in the search box, type the model number of your router, followed by pressing the Enter key.

Now you can download the latest version of the router from the Downloads section.

Once the firmware file has been downloaded, locate "Upgrade," "Admin," or "Firmware" options on the router's login page. Locate and click Browse to locate the downloaded file; click Open. Finally, click the option to update or upgrade.

5. Restore the computer's network settings to default factory settings

If restarting the router does not allow any computers to connect with a network, one or more of the following options should be attempted.

If corrupted or misconfigured network settings are the causes of the problem, then you can restore the setting to their default condition by resetting the network protocol. Just like that, proceed with the below-listed steps to reset your device to get it online:

Open advanced Settings by pressing Win + I, then select Network & internet settings.

Once you have located the Advanced Network settings, scroll down to view More Settings and then select them.

Select Network Reset from the pop-up menu followed by clicking Reset Now.

Once the process is complete, restart the computer.

6. Reset Network Protocol.

The aforementioned steps reboot the protocols your network uses to connect and transfer data. You open the Command Prompt in administrator mode and execute these following commands in turn to do this.

Change IP Address

resets the IP address using the internet command shell

The Winsock Reset

Winsock reset in Powershell

Clean DNS

the command "ipconfig /flushdns";

One more thing to do: check if the problem is fixed.

"Not connected" or "Windows does not have any available connections

7. Instead, use the Google Public DNS.

Devices can also not be able to resolve website addresses and hence encounter problems of no Internet connectivity in case their DNS settings are incorrect or are not set at all. Try using another, more reliable, DNS server in case the one you are using is unavailable or for some reason problematic. Follow these steps to proceed with the process as well.

Open the interface.

Go to Network and Sharing Center.

Under "Connections," click on the link listed.

Click on Properties.

Double-click on the Internet Protocol Version 4.

To employ Google Public DNS, click Alternative DNS server addresses and set the Preferred DNS server and Alternate DNS server to the following values:Preferred DNS For DNS: 8.8.8.8Backup For Domain Name System: 8.8.4.4

Click OK to make sure all is working as it should be with the Internet.

Using these ways which I have suggested in this post, I hope you shall be able to connect to the Internet and use it.